click photo to enlarge
Related Products |
||
X200 AA-Cell Transmitter Family (6" - 28")
Multi-Frequency TRAXALL Transmitter
The X200 transmitter family are CDI's small-sized TRAXALL compatible electromagnetic transmitters. This family consists of two transmitters which house either 2 or 3 AA-Cell batteries. These transmitters have both user-adjustable frequency and output power through the use of CDI's FieldLink wireless communications system. Using CDI's TRAXALL transmitters, an operator may have direct control over battery life vs. strength tradeoffs. Short pig runs can go for maximum power and long pig runs can be more conservative with pulsing modes and/or reduced power.
X200-3AA Specifications |
|
Line Sizes |
8" - 28" [203mm - 711mm] |
| Pressure | 2,500psi [172 bar] |
| Length | 7.07" [179.5mm] |
| Diameter | 1.125" [29mm] |
| Material | 304L Stainless Steel (Titanium high pressure available) |
| Temp Range | -40°C to 60°C using standard alkaline batteries Higher temperatures are available with specialized batteries. |
| End Caps | Knurled, hand-tightened |
Battery Life vs Range |
Alkaline Batteries | Lithium Batteries | |
Maximum Range |
Range: Constant: Pulsing: |
48.8 ft (14.9m) 21 hrs 63 hrs |
56 ft (17m) 13 hrs 39 hrs |
Optimal Power * |
Range: Constant: Pulsing: |
43.4 ft (13.2m) 45 hrs 136 hrs |
45 ft (13.7m) 35 hrs 107 hrs |
Maximum Life * |
Range: Constant: Pulsing: |
23 ft (7m) 309 hrs 7,829 hrs |
30 ft (9.1m) 216 hrs 5,483 hrs |
| * Unless otherwise requested transmitters ship in Max Range mode and pulsing transmission. Optimal Power and Max Life modes require programming with FieldLink USB and Configurator software. | |||
Device Documentation
X200 AA-Cell Family Operations Manual
X200-3AA Dimensional drawing (pdf) (shown with optional flange installed)
FieldLink Configurator Windows Software
Materials and craftsmanship are warranted for a period of one year.
X200-2AA Specifications |
|
Line Sizes |
6" - 24" [152mm - 620mm] |
| Pressure | 2,500psi [172 bar] |
| Length | 5.00" [127.2mm] |
| Diameter | 1.125" [29mm] |
| Material | 304L Stainless Steel (Titanium high pressure available) |
| Temp Range | -40°C to 60°C using standard alkaline batteries Higher temperatures are available with specialized batteries. |
| End Caps | Knurled, hand-tightened |
Battery Life vs Range |
Alkaline Batteries | Lithium Batteries | |
Maximum Range |
Range: Constant: Pulsing: |
36.9 ft (11.2m) 23 hrs 69 hrs |
42 ft (12.8m) 13 hrs 41 hrs |
Optimal Power * |
Range: Constant: Pulsing: |
28.1 ft (8.6m) 47 hrs 143 hrs |
32.6 ft (9.9m) 34 hrs 103 hrs |
Maximum Life * |
Range: Constant: Pulsing: |
16.1 ft (4.9m) 301 hrs 7,638 hrs |
21 ft (6.4m) 201 hrs 5,100 hrs |
| * Unless otherwise requested transmitters ship in Max Range mode and pulsing transmission. Optimal Power and Max Life modes require programming with FieldLink USB and Configurator software. | |||
Device Documentation
X200 AA-Cell Family Operations Manual
X200-2AA Dimensional drawing (pdf) (shown with optional flange installed)
FieldLink Configurator Windows Software
Materials and craftsmanship are warranted for a period of one year.
FieldLink is CDI's proprietary wireless communications network. Each X100 family transmitter comes with a built-in radio frequency antenna and by connecting to the transmitter with our proprietary radio frequency USB key (sold separately), any Windows PC or laptop can wirelessly communicate to and configure the transmitter.
Our Windows Configurator software for FieldLink is freely available here.
HOWTO Video: Configuring TRAXALL Transmitters:
Devices covered under United States Patent 9172406 and Canadian Patent 2850115. European Patents applied for.